DuoBloc Acoustic Sliding Door - 366 System

Lidco's DuoBloc Acoustic Sliding Door has been developed to provide a quality high performance sliding door, designed to provide superior acoustic performance and comprises an internal and external sliding sash.

This DuoBloc is ideally suited for residential housing and low to high rise residential units where noise is a key concern of the building's design.

The system has been tested to conform to the measurement requirements of AS 1191-1985 for sound transmission loss. The perimeter frame incorporates a range of shopfront compatible framing options that make this system particularly versatile for use on multi story residential buildings.

The DuoBloc system is engineered to be manufactured in a variety of framing combinations including fixed-slide, fixed-slide-fixed and centre bi-part options. It will also adapt to many fixed glass combinations for continuous floor to ceiling glazing.

Technical Information Product Sheet
Includes thermal properties for various types of glazing, maximum panel sizes and acoustic tests results.

FEATURES:

• Accepts glass thickness from 4mm-10.38mm single glazed and 14mm-18mm double glazed
• Range of heavy duty interlock options for high wind locations
• Range of roller/rail combinations to suit door/glass weights
• Range of self draining sill options
• Choice of locking options - locks can be master keyed
• Sub head and sub sill options
• 150mm frame size - able to couple with Lidco's Emporia Face Glazed (715 System).
• Available in various powder coat and anodised finishes

SPECIFICATION TEXT:

• Aluminium frames to be manufactured using Lidco 366 System: DuoBloc Sliding Door.
• Selected framing to be engineered, manufactured and installed in accordance with:
  AS 2047-2048 (windows in buildings)
  AS/NZS 1170 (loading code)
  AS/NZS 1664 (aluminium structures code)
• Selected glazing to be in line with performance requirements as set out in AS 1288 (glass in buildings)
• Size limitations are governed by design intent, glass selection and local wind load and deflection requirements. For further technical assistance and fabricator selection contact your local Lidco sales office. An engineer should be consulted to ensure selected framing meets the requirements as set out in the relevant Australian standards

Click to enlarge

Click to enlarge