Alto Sliding/Stacking Door - 360 System

Lidco's Alto Sliding/Stacking Door has been developed to provide a quality sliding/stacking door, ideally suited for residential housing, low/medium rise units, hotels and aged care facilities.

The system is designed on the principles of a drain joint to enhance its weathering performance and incorporates durable sash seals to protect your home from dust and moisture. The sash slides on the outside of the frame assisting in superior weathering capability. The perimeter frame incorporates insect and security screens that are located on the inside of the room, particularly popular on multi storey buildings.

The Alto Sliding/Stacking Door can be manufactured in various framing combinations including fixed-slide, fixed-slide-fixed and centre bi-part as well as three and four panel stacking options. Perimeter framing will couple to all 100mm and 125mm fixed glass framing combinations for continuous floor to ceiling glazing. The system accepts glazing ranging from 4mm to 10.38mm single glazed and 14mm-18mm double glazed without the need of glazing adaptors.

Alto Sliding/Stacking Door brochure

Technical Information Product Sheet
Includes thermal properties for various types of glazing, maximum panel sizes and water/structural tests results.

FEATURES:

• Accepts glass thickness from 4mm-10.38mm single glazed and 14mm-18mm double glazed
• Incorporated screen option
• Range of heavy duty interlock options for high wind locations
• Range of roller/rail combinations to suit door/glass weights
• Range of self draining and heavy duty sill options
• Choice of locking options
• Subhead and subsill options
• Sliding door 100mm frame size
• Stacking door 125mm frame size
• Four panel stacking door 165mm frame size
• Lowrise sill option for non-exposed locations
• Available in various powder coat and anodised finishes

SPECIFICATION TEXT:

• Aluminium frames to be manufactured using Lidco 360 System: Alto Sliding/Stacking Door and associated framing
• Selected framing to be engineered, manufactured and installed in accordance with:
  AS 2047-2048 (windows in buildings)
  AS/NZS 1170 (loading code)
  AS/NZS 1664 (aluminium structures code)
• Selected glazing to be in line with performance requirements as set out in AS 1288 (glass in buildings)
• Size limitations are governed by design intent, glass selection and local wind load and deflection requirements. For further technical assistance and fabricator selection contact your local Lidco sales office. An engineer should be consulted to ensure selected framing meets the requirements as set out in the relevant Australian standards

Click to enlarge

Click to enlarge

Click to enlarge